Name keychain: Maria
Made 2026-11-07 with Kindprint (keychain).

PRINTER
  Files are laid out for a 250 x 210 mm bed. Every part lies flat on Z = 0, face up.
  Keep the layer height a divisor of the colour-change heights (0.1 or 0.2 mm).

FILES
plate-with-name
  Filament: Plate (#f4c6d0), about 3 g, 8 min
  Parts: Maria
  Colour change: the layer ending at Z = 3 mm is the last in the colour before.
  The 3MF has the M600 set. For the STL, add an M600 at 3.2 mm (0.2 mm layers) and load Name (#ffffff).

KEYCHAIN
  3 mm plate with the name 1.2 mm proud. The ring hole is 5.2 mm across,
  for a 4-5 mm split ring or a jump ring. 3 perimeters and 15 % infill are plenty.

CHECKS
  Mesh check: every solid is closed and manifold.
