Name puzzle: MARIA
Made 2026-11-07 with Kindprint (puzzle).

PRINTER
  Files are laid out for a 250 x 210 mm bed. Every part lies flat on Z = 0, face up.
  Keep the layer height a divisor of the colour-change heights (0.1 or 0.2 mm).

FILES
board
  Filament: Board (#f6efe6), about 47 g, 2 h 02 min

colour-1
  Filament: Colour 1 (#f28b82), about 6 g, 16 min
  Parts: M
  One colour, no change.

colour-2
  Filament: Colour 2 (#fbbc04), about 4 g, 11 min
  Parts: A
  One colour, no change.

colour-3
  Filament: Colour 3 (#81c995), about 5 g, 13 min
  Parts: R
  One colour, no change.

colour-4
  Filament: Colour 4 (#78a9ff), about 2 g, 6 min
  Parts: I
  One colour, no change.

colour-5
  Filament: Colour 5 (#c58af9), about 4 g, 11 min
  Parts: A
  One colour, no change.

colour-6
  Filament: Colour 6 (#ff8bcb), about 3 g, 7 min
  Parts: heart
  One colour, no change.

PUZZLE
  The board is 7 mm: a 3 mm floor with 4 mm pockets. The letters are
  8 mm thick and stand 4 mm proud, with 0.3 mm of play on every side, so
  they drop in and lift out easily. If a letter is tight, sand its edge lightly. Print each colour file
  on its own; no glue needed. For small children, check every piece is too big to swallow.

CHECKS
  Mesh check: every solid is closed and manifold.
